Actiontec PK5000 : Bridged

From FRII Support

Jump to: navigation, search
  1. After the PK5000 is connected to your computer, open a web browser such as Internet Explorer, connect to the PK5000 by clicking the address bar and typing "" (without quotes), and then press Enter. You should see this screen:


  2. Once it has loaded, click on the "Quick Setup" button. That should bring up this screen:


  3. Click the "Advanced IP Configuration button." That should bring up this screen:


    • For item 1: Set the type to RFC 1483 Transparent Bridging.
    • For item 2-5: Leave as is.
  4. Click "Apply." This will bring up the following screen:

    Thank you.JPG

  5. After the previous page reappears, you should be connected.
Personal tools